- ICT
- Access Control
- Keypad
- ICT Touch Sense LCD Keypad
- Specifications
- Upgradable Firmware
- Communication
- Auto Logout Confirmation
-
Specifications
Ordering Code
PRT-KLCS
Operating Voltage
11.0VDC to 14VDC
Operating Current
60mA (95mA max)
User Interface Display
Energy smart backlit LCD 16x 2 alphanumeric display with enhanced viewing angle
User Interface Keypad
Combined 23 key capacity touch keypad with 3 system status LEDs
Inputs
2 standard or 4 using input duplex mode 1 tamper (PCB mounted external micro switch assembly)
Outputs
1 open collector (negative, 50mA Max) output. Programmable for all output functions
Operating Temperature
0˚ to 50˚C (32˚ to 122˚F)
Storage Temperature
-10˚ to 85˚C (14˚ to 185˚F)
Humidity
0% to 93% non condensing, indoor use only (relative humidity)
Dimensions
125 x 125 x 18mm (4.92 x 4.92 x 0.71”)
Weight
318g (11.21oz)
-
Upgradable Firmware
Utilizing the latest flash technology and high performance communication mediums the firmware of the Protege Touch Sense LCD Keypad can be updated using the ICT Loadit utility over the Protege system module network.
-
Communication
Single RS-485 communication interface port used for all network communication functions and interconnects to other modules.
-
Auto Logout Confirmation
The Protege Touch Sense LCD Keypad can be programmed for a custom auto logout time specific to each station.
Videos
-
How to Use Video Intercom Easy UI 2.0 on Hikvision Indoor Monitor
How to setup Hikvision Modular Intercom with single Indoor Monitor
How to add additional Indoor extensions to Hikvision Modular Intercom
How to add additional Sub Door Station to Hikvision Modular Intercom
How to configure calling schedules on Hikvision Intercoms
How to set passwords on Hikvision's Modular intercoms
-
How to Use Video Intercom Easy UI 2.0 on Hikvision Indoor Monitor
How to setup Hikvision Modular Intercom with single Indoor Monitor
How to add additional Indoor extensions to Hikvision Modular Intercom
How to add additional Sub Door Station to Hikvision Modular Intercom
How to configure calling schedules on Hikvision Intercoms
How to set passwords on Hikvision's Modular intercoms