Contact Our Team
BOSCH Video-Based Fire Detection
Thumb

BOSCH Video-Based Fire Detection

  • Very fast fire and smoke detection
  • Robust against false alarms
  • Covers large monitoring area
  • Outstanding performance under low-light conditions
  • Resolution 1080p
Technical Specification
Key Specifications
Min. detection size for Smoke, standard setting(% of picture width) 1.6
Smoke speed(% of picture height /s) 0.7 – 8.4
Min. Smoke density (%) 40
Min. detection size for Flame, standard setting(% of picture width) 1.1
Min. illumination level (lx) 2
Standard G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC-LC, 48 kbps at 16 kHz sampling rate AAC-LC, 80 kbps at 16 kHz sampling rate
Signal-to-Noise Ratio >50 dB
Audio Streaming Full-duplex / half duplex
Operating Temperature -20°C to +50°C (-4°F to 122°F)
Storage Temperature -30°C to +70°C (-22°F to +158°F)
Operating Humidity 20% to 93% RH
Storage Humidity up to 98% RH
Analog video out SMB connector, CVBS (PAL/NTSC), 1 Vpp, 75 Ohm
Audio line in 1 Vrms max, 18 kOhm typical,
Audio line out 0.85 Vrms at 1.5 kOhm typical,
Audio connectors 3.5 mm mono jack
Alarm input 2 inputs
Alarm input activation +5 VDC nominal; +40 VDC max. (DC-coupled with 50 kOhm pull-up resistor to +3.3 VDC) (< 0.5 V is low; > 1.4 V is high)
Alarm output 1 output
Alarm output voltage 30 VAC or +40 VDC max. Maximum 0.5 A continuous, 10VA (resistive load only)
Parts Included
Parts Included With This Product
Quantity Component
1 AVIOTEC IP starlight 8000
1 Varifocal SR Megapixel Lens (LVF-5005C-S4109  F.01U.297.770)
1 TC9208 bracket (TC9208  F.01U.143.919)

BOSCH Video-Based Fire Detection