UTS Group supplies, installs, repairs, and maintains products and services in advanced security and locksmith services. Openpath is one of the brands that we offer. Openpath Smart Hubs and the Single Door Controller are all-in-one, preconfigured access control units. These units work with a power supply and can be used with a battery backup to keep your system fully functional during a power outage.
 Cloud Security |  CloudSync |  Easy to Install |  Fail Safe |  Interoperability |
 Monitoring |  Expandable |  Reliability |  Simple Management |  All In One Functionality |
All Openpath Controllers that we offer come with a Lifetime Warranty
Single Door Controller
Supports PoE/PoE+, 12-24V supply & up to two entries. It has configurable wet/dry relays, Request to Exit (REX) Sensors, as well as Contact Sensors.
Install Options
| Mounting Instructions: | Mount on wall or on single or double gang box |
| Size: | 14.2 x 14.2 x 4.2 cm (5.6 x 5.6 x 1.65 in) |
| Weight: | 360 g (12.7 oz) |
| Operating Temperature: | 32° to 122°F (0° to 50°C) |
| Operating Humidity: | 5% to 85% relative, non-condensing |
| Communication Ports: | 10/100 Mbps Ethernet, 2 USB expansion ports |
Tech Specs
| Operating Voltage: | 12-24VDC |
| Output Ratings: | Power Out can supply up to 100mA @ 12V or 50mA @ 24V, 2 reader ports, max power output: 250mA @ 12V each, 2 relays, max power output: – PoE: Max 3W combined output (250mA @ 12V, 125mA @ 24V) – PoE+: Max 9W combined output (750mA @ 12V, 375mA @ 24V) |
| REX Sensors: | 2 REX Sensors, nominal 5VDC, 1kohm to each input (resistors built into Controller) |
| Contact Sensors: | 2 Contact Sensors, nominal 5VDC, 1kohm to each input (resistors built into SDC) |
| Compliance: |     |
| Readers: | Up to 2 Openpath Readers & Up to 2 Wiegand Readers |
| Relays: | 2 Relays, 24VDC, 2 Amp (resistive) |
12/24V 4-Door Access Control Panel (Core Series)
Plug and play design for easy expansion & customization. Supports 4 Readers, 4 Door Relays, 4 Contact Sensors, 4 REX Sensors & 2 AUX Relays for extra outputs. Also supports 12-24 locking hardware.
24V 4-Door Access Control Panel (Core Series)
Plug and play design for easy expansion & customization. Supports 4 Readers, 4 Door Relays, 4 Contact Sensors, 4 REX Sensors & 2 AUX Relays for extra outputs. Also supports 24 locking hardware.
.
Install Options
| Mounting Instructions: | Wall mountable locking enclosure: 14” H, 12” W, 5” D (356 x 305 x 114 mm) |
| Weight: | approximately 10 lbs (4.5 kg) |
| Operating Temperature: | 32° to 122°F (0° to 50°C) |
| Operating Humidity: | 5% to 85% relative, non-condensing |
| Communication Ports: | 10/100 Mbps Ethernet, 3 USB expansion ports |
Tech Specs
| Operating Voltage: | 12-24VDC |
| Operating Current: | 1.25A @ 24VDC (with 4 Openpath Readers), 0.7A @ 24VDC (with no readers) |
| Compliance: | |
| REX Sensors: | 4 REX Sensors, nominal 5VDC, 1kohm to each input (resistors built into ACU) |
| Contact Sensors: | 4 Contact Sensors, nominal 5VDC, 1kohm to each input |
| Readers: | Up to 4 Openpath Readers |
| End-of-Line (EOL) Monitoring: | EOL monitoring with single or double termination on all REX, Contact, and Auxiliary inputs supported with user-installed 1k resistors |
| Relays: | Door: 4 Relays, 5A @ 24VDC (resistive) Auxiliary: 2 Relays, 1A @ 24VDC |
| Auxiliary I/Os: | 4 input lines with EOL monitoring, may be used for Wiegand readers or additional sensors |
12/24V 8-Door Access Control Panel (Core Series)
Plug and play design for easy expansion & customization. Supports 6 Readers, 4 Door Relays, 4 Contact Sensors & 4 REX Sensors. Includes I/O Elevator Board supports 16 floors & supports 24V locking hardware.
Install Options
| Mounting Instructions: | Wall mountable locking enclosure: 20” H, 16” W, 4.5” D (508 x 406 x 114 mm) |
| Weight: | approximately 10 lbs (4.5 kg) |
| Operating Temperature: | 32° to 122°F (0° to 50°C) |
| Operating Humidity: | 5% to 85% relative, non-condensing |
| Communication Ports: | 10/100 Mbps Ethernet, 3 USB expansion ports |
Tech Specs
| Operating Voltage: | 12-24VDC |
| Operating Current: | 3.3A @ 12VDC (with 8 Openpath Readers) 1.3A @ 12VDC (with no readers) 1.8A @ 24VDC (with 8 Openpath Readers) 0.7A @ 24VDC (with no readers) |
| REX Sensors: | 8 REX Sensors, nominal 5VDC, 1kohm to each input (resistors built into ACU) |
| Contact Sensors: | 8 Contact Sensors, nominal 5VDC, 1kohm to each input |
| Readers: | Up to 8 Openpath Readers |
| End-of-Line (EOL) Monitoring: | EOL monitoring with single or double termination on all REX, Contact, and Auxiliary inputs supported with user-installed 1k resistors |
| Relays: | Door: 8 Relays, 5A @ 24VDC (resistive) Auxiliary: 4 Relays, 1A @ 24VDC |
| Auxiliary I/Os: | 4 input lines with EOL monitoring, may be used for Wiegand readers or additional sensors |
24V Elevator Access Control Panel (Core Series)
Plug and play design for easy expansion & customization. Supports 6 Readers, 4 Door Relays, 4 Contact Sensors & 4 REX Sensors. Includes I/O Elevator Board supports 16 floors & supports 24V locking hardware.
Install Options
| Mounting Instructions: | Wall mountable locking enclosure: 14” H, 12” W, 5” D (356 x 305 x 114 mm) |
| Weight: | approximately 10 lbs (4.5 kg) |
| Operating Temperature: | 32° to 122°F (0° to 50°C) |
| Operating Humidity: | 5% to 85% relative, non-condensing |
| Communication Ports: | 10/100 Mbps Ethernet, 3 USB expansion ports |
Tech Specs
| Operating Voltage: | 12-24VDC |
| Operating Current: | 1.75A @ 24VDC (with 6 Openpath Readers) 0.9A @ 24VDC (with no readers) |
| REX Sensors: | 4 REX Sensors, nominal 5VDC, 1kohm to each input (resistors built into ACU) |
| Contact Sensors: | 4 Contact Sensors, nominal 5VDC, 1kohm to each input |
| Readers: | Up to 6 Openpath Readers |
| End-of-Line (EOL) Monitoring: | EOL monitoring with single or double termination on all REX, Contact, and Auxiliary inputs supported with user-installed 1k resistors |
| Relays: | Door: 4 Relays, 5A @ 24VDC (resistive) Auxiliary: 18 Relays, 1A @ 24VDC |
| Auxiliary I/Os: | 4 input lines with EOL monitoring, may be used for Wiegand readers or additional sensors |
| General Purpose Inputs: | 16, 3V-24VDC |
12V Access Control Panel
Controller that supports up to 4 entries and 8 readers. Locking hardware must be powered separately. Comprised of 2 AMP Power supply with battery support.
12/24V Access Control Panel
Controller that supports up to 4 entries and 8 readers. Supports 3 Amp 24V power supply with battery support. Includes 12V and 24V provided for locking hardware.
.
Install Options
| Mounting Instructions: | Wall mountable locking enclosure: 14” H, 12” W, 4.5” D |
| Weight: | approximately 10 lbs (4.5 kg) |
| Easy to Install: | Includes removable contact terminal blocks for convenient wiring |
| Operating Temperature: | 0° to 50°C (32° to 122°F) |
| Operating Humidity: | 5% to 85% relative, non-condensing |
| Communication Ports: | 10/100 Mbps Ethernet & 3 USB expansion ports |
Tech Specs
| Operating Voltage: | 10-14VDC |
| Operating Current: | 2000 mA MAX (with 4 Openpath Readers) 1000 mA (with no Openpath readers) |
| REX Sensors: | 4 REX Sensors, nominal 5VDC, 1kohm to each input (resistors built into ACU) |
| Contact Sensors: | 4 Contact Sensors, nominal 5VDC, 1kohm to each input (resistors built into ACU) |
| Readers: | Up to 4 Openpath Readers & Up to 4 Wiegand Readers |
| Relays: | 4 Relays, 24VDC, 5 Amp (resistive) |
WE ARE EXPERTS IN:
Access Control | Automatic Doors | Security Cameras | Locksmith | Intercom
