PS-SE Power Supply

Power supply with optional battery backup for all 3000 and 8000 Series exit devices with Silent Electrification Motorized Latch Retraction (SE)option.

Function:

This power supply is designed for the Silent Electrification Motorized Latch Retraction (SE) option on Adams Rite exit devices. It operates at 24 VDC to power up to two SE exit devices in sequential or independent modes. The PS-SE is also equipped with a fire alarm disconnect interface circuitry.

Certifications:

UL listed

Features:

Housing: Hinged, steel cabinet measures 10″ x10-3/8″ x 4-1/8″ [254 mm x 263.5 mm x104.8 mm]. Black, baked enamel finish,with knockouts for conduit connections. Sized to accommodate two sealed, lead acid batteries (7AH, not included).

Operating Modes: The PS-SE is designed to power up to two 3000 SE or 8000 SE exit devices in the following operating modes:
• Near Simultaneous Mode – A single input switch (dry contact) operates two devices with less than one second delay. Ideal for double-door applications.
• Independent Mode – Each SE exit device is controlled by its own input switch.

Shipping Weight: 9 lbs [4.1 kg]

Electrical:

Input Power: 115 VAC, 0.7A

Primary Fuse: The PS-SE has two user-serviceable fuses:
F1: Transformer output: 2A/250V 5x20MM
F2: Transformer input: 2A/250V 5x20MM

Open Hold Times: The PS-SE has two open hold timers. Hold open time settings are adjustable from 2-60 seconds.

Output Voltage: 2 Amp @ 24VDC

Options

Battery Backup Kit (BBK-SE) available separately to add battery backup capability to the PS-SE. The enclosure is sized toaccommodate two 12 volt – 7AH sealed, lead acid batteries (not included).

Product Note: Adams Rite recommends that for optimal performance all exit devices with the SE option are installed and powered using PS-SE power supplies. Failure to do so may cause permanent damage to the exit device.