Openpath Single Door Controller

  • Supports PoE/PoE+ and 12-24V supply
  • Supports up to 2 entries
  • Configurable wet/dry relays

The Openpath Single Door Controller is an access control unit that supports up to two entries and two Openpath Smart Readers. The Controller securely makes all entry decisions and can be configured via Bluetooth using the Openpath Admin App. With wired and wireless connectivity, the Single Door Controller communicates with the Openpath access control cloud for system management and maintenance. It includes ports for Relays (Dry/Wet), Openpath Smart Readers, Request to Exit (REX) Sensors, Contact Sensors, as well as configurable inputs for Wiegand devices or extra sensors. The Controller uses RS-485 wiring to connect to the Openpath Smart Readers. The Single Door Controller can be wall-mounted or installed on a single or double gang box and may be powered using PoE, PoE+, or an external 12V to 24V supply.

Cloud Security
All communication with the cloud is encrypted end-to-end with strong public key cryptography and mutual authentication.
CloudSync is our offline first technology, which allows the system to operate even if your Internet connection goes down.
Easy to Install
Standard wiring, easily replaces legacy systems.
Fail Safe
Because we understand the serious impact of a system failure, we set out to prevent this from being an option. Openpath is configured to withstand power failures and Internet outages.
Easily integrates with physical on-premise systems and logical software based systems.
Network and device monitoring systems are built right into our products to ensure a smooth experience for our users. Should a problem arise, our diagnostic and troubleshooting insight will help us resolve the issue as quickly and painlessly as possible.
Openpath is designed to be modular and expandable, making it easy to support additional entries, doors, and elevator floors.
Designed to provide a reliable, consistent experience.
Simple Management
Software runs in the cloud, no need to set up or maintain local servers and software.
Install Options
Mounting Instructions
    • Mount on wall or on single or double gang box
    • 14.2 x 14.2 x 4.2 cm (5.6 x 5.6 x 1.65 in)
    • 360 g (12.7 oz)
Operating Temperature:
    • 0° to 50°C (32° to 122°F)
Operating Humidity:
    • 5% to 85% relative, non-condensing
Communication Ports:
    • 10/100 Mbps Ethernet
    • 2 USB expansion ports
Operating Voltage:
    • 12-24VDC
Output Ratings:
    • Power Out can supply up to 100mA @ 12V or 50mA @ 24V
    • 2 reader ports, max power output: 250mA @ 12V each
    • 2 relays, max power output:
      • PoE: Max 3W combined output (250mA @ 12V, 125mA @ 24V)
      • PoE+: Max 9W combined output (750mA @ 12V, 375mA @ 24V)
REX Sensors:
    • 2 REX Sensors, nominal 5VDC, 1kohm to each input (resistors built into Controller)
Contact Sensors:
    • 2 Contact Sensors, nominal 5VDC, 1kohm to each input (resistors built into SDC)
    • Conforms to UL 2043
Openpath Readers:
    • Up to 2 Openpath Readers
Wiegand Readers:
    • Up to 2 Wiegand Readers
    • 2 Relays, 24VDC, 2 Amp (resistive)
Scroll to Top

Submit a Ticket


Until Then

Please Contact Us Here

We are your one stop solution for all your security needs.

Submit a ticket