Openpath Controller Board

  • Supports up to 4 entries
  • Add to Smart Hub or use on its own

The Openpath 4 Door Controller Board is a standalone access control board (no enclosure, no power supply) that supports up to four entries and up to eight readers (four Openpath Smart Readers and four Wiegand readers). The Controller Board securely makes all entry decisions and includes ports for Relays, Openpath Smart Readers, Wiegand Readers, Request to Exit (REX) Sensors, and Contact Sensors. The Controller Board uses RS-485 wiring to connect to the Smart Readers and has a USB port to connect to additional boards. The Controller Board should be installed inside an enclosure and powered using a 12V supply.

CloudSync is our offline first technology, which allows the system to operate even if your Internet connection goes down.
Cloud Security
All communication with the cloud is encrypted end-to-end with strong public key cryptography and mutual authentication.
Easy to Install
Standard wiring, easily replaces legacy systems.
Fail Safe
Because we understand the serious impact of a system failure, we set out to prevent this from being an option. Openpath is configured to withstand power failures and Internet outages.
Easily integrates with physical on-premise systems and logical software based systems.
Network and device monitoring systems are built right into our products to ensure a smooth experience for our users. Should a problem arise, our diagnostic and troubleshooting insight will help us resolve the issue as quickly and painlessly as possible.
Openpath is designed to be modular and expandable, making it easy to support additional entries, doors, and elevator floors.
Designed to provide a reliable, consistent experience.
Simple Management
Software runs in the cloud, no need to set up or maintain local servers and software.
Install Options
    • 10 x 22 cm (4 x 8.6 in)
    • 212 g (7.5 oz)
Easy to Install:
    • Includes removable contact terminal blocks for convenient wiring
Operating Temperature:
    • 0° to 50°C (32° to 122°F)
Operating Humidity:
    • 5% to 85% relative, non-condensing
Communication Ports:
    • 10/100 Mbps Ethernet
    • 3 USB expansion ports
Tech Specs
Operating Voltage:
    • 10-14VDC
Operating Current:
    • 2000 mA MAX (with 4 Openpath Readers)
    • 1000 mA (with no Openpath readers)
REX Sensors:
    • 4 REX Sensors, nominal 5VDC, 1kohm to each input (resistors built into Controller Board)
Contact Sensors:
    • 4 Contact Sensors, nominal 5VDC, 1kohm to each input (resistors built into Controller Board)
Openpath Readers:
    • Up to 4 Openpath Readers
Wiegand Readers:
    • Up to 4 Wiegand Readers
    • 4 Relays, 24VDC, 5 Amp (resistive)
Scroll to Top

Submit a Ticket


Until Then

Please Contact Us Here

We are your one stop solution for all your security needs.

Submit a ticket