Contact Our Team

Honeywell NETAXS-4

Hybrid Access Control Panel

Honeywell’s web-based NetAXS controller provides solutions for installations of any size. NetAXS-4 enables users to securely manage their system anywhere there’s an Internet connection—with no dedicated PC costs. The user-friendly design makes it simple to install and easy to operate and maintain. NetAXS-4 gives you all the benefits of traditional access control such as helping you secure your doors, manage employee access, and manage sites remotely. It also lets you pull reports easily to meet compliance requirements. With a browserbased interface, your learning curve and training times are significantly decreased. No dedicated software required—simply log on and you’re ready to go, securely—from the office or anywhere. NetAXS-4 has been developed with an installer-friendly design that easily adapts to existing IT infrastructure and methods. This means reduced installation and support. Plus, NetAXS-4 integrates with Honeywell’s fully-featured WIN-PAK Integrated Security Solution to enable more robust and sophisticated NetAXS integrations. So as your system grows, NetAXS grows with you.

Part Number
NetAXS-4 – Web based

 

Specifications
User Friendly
  • Pre-wired enclosure, power supply, and relay board saves installation time (NX4L1 only)
  • Easy to use landing page.
  • End-user training in less than 30 minutes.
  • All tools—from basic settings to adding/ deleting cards— located on one page.
  • Simply log in and begin!
Dynamic Screen Updates
  • No user interaction required to push status updates from NetAXS-4 to the web screens.
  • Alarms, events, inputs, outputs, and status screens automatically update.
  • Optimized data transfer between the controller and web browsers results in reduced bandwidth and improved screen response times.
RS-485 Loop with NetAXS-123
  • Connect and manage a NetAXS-4 panel through either a NetAXS-4/-123 gateway panel.
  • Connect and manage up to 31 panels in a group.
  • Add doors without having to rip and replace hardware, or add software.
Door Access Modes and Options
  • Assign cardholders different access levels.
  • Dynamic supervisor access configurations for single and double card swipes.
  • Escort access requires a supervisor escort for a non-supervisor cardholder.
Flexible and Secure
  • Compatible with WIN-PAK®XE, WIN-PAK SE, WIN-PAK PE, WIN-PAK PRO CS (managed access) software.
  • Up to 256-bit AES encryption between NetAXS panel and WIN-PAK host.
Ordering Info
Part No. Description
NETAXS-4 WEB-BASED ACCESS CONTROL PANELS
NX4S1 NetAXS-4: 4 Door Control Panel (Standard Enclosure)
NX4L1 NetAXS-4: Pre-wired 4 Door Control Panel (Deluxe Enclosure)
NX4PCB NetAXS-4: NetAXS PCB Board with Manual
NETAXS-4 ACCESS CONTROL STARTER KITS WITH READERS
WPNX4L30 NetAXS-4: IP Ready Access Starter Kit with WIN-PAK SE, NX4S1 Deluxe Standard Enclosure Option and (4) OP30HONR Mullion Proximity Readers
WPNX4S30 NetAXS-4: IP Ready Access Starter Kit with WIN-PAK SE, NX4S1 Standard Enclosure Option and (4) OP30HONR Mullion Proximity Readers
NX4OP30S NetAXS-4: NetAXS with Standard Enclosure – Standalone Web-based Access 4 Door Kit with (4) OP30HONR
NX4OP40S NetAXS-4: NetAXS with Standard Enclosure – Standalone Web-based Access 4 Door Kit with (4) OP40HONR
NX4OP30L NetAXS-4: NetAXS with Deluxe Enclosure – Standalone Web-based Access 4 Door Kit with (4) OP30HONR
NX4OP40L NetAXS-4: NetAXS with Deluxe Enclosure – Standalone Web-based Access 4 Door Kit with (4) OP40HONR
NETAXS ACCESSORIES3
NX4IN4 NetAXS Input Board – 32 inputs per board. Connect 2 per panel. Total 64 inputs.
NX4OUT4 NetAXS Output Board – 16 outputs per board. Connect 4 per panel. Total 64 inputs.
NXIOENCKT Double board enclosure for NX4IN, NX4OUT

Get Pricing