- Hikvision
- Access Control
- HIKVISION DS-K2600T – Pro Series Access Controller
- Device Interface
- General
-
Device Interface
- CommunicationTCP/IP, RS-485, Wiegand (W26/W34)
- Accessible Card Reader2601T: 2 card readers (RS-485 interface), and 2 card readers (Wiegand interface) 2602T: 4 card readers (RS-485 interface), and 4 card readers (Wiegand interface) 2604T: 8 card readers (RS-485 interface), and 4 card readers (Wiegand interface)
- LED IndicatorPower supply status, Communication status, and work status
- Built-In ClockSupport
-
General
- Working Temperature-20 °C to +65 °C (-4 °F to +149 °F)
- Working Humidity10% to 90% (Non-condensing)
- Power Supply2601T:≤50W 2602T:≤100W 2604T:≤100W
- Working VoltageDC 12V/1A
- Power Dissipation (Without Load)≤4W
- Dimensions (L×W×H)373 mm × 345 mm × 98 mm (14.7″ × 13.6″ × 3.6″)
- CertificationCE, FCC, CB
- Processor32-Bit
- Storage32M
- Input Interface2601T: Alarm input × 4, door contact × 1, exit button × 1, case input × 2, tamper alarm × 1 2602T: Alarm input × 4, door contact × 2, exit button × 2, case input × 4, tamper alarm × 1 2604T: Alarm input × 4, door contact × 4, exit button × 4, case input × 8, tamper alarm × 1
- Output Interface2601T: Lock relay × 1, alarm relay × 2 2602T: Lock relay × 2, alarm relay ×4 2604T: Lock relay × 4, alarm relay × 4
Videos
-
How to Use Video Intercom Easy UI 2.0 on Hikvision Indoor Monitor
How to setup Hikvision Modular Intercom with single Indoor Monitor
How to add additional Indoor extensions to Hikvision Modular Intercom
How to add additional Sub Door Station to Hikvision Modular Intercom
How to configure calling schedules on Hikvision Intercoms
How to set passwords on Hikvision's Modular intercoms
-
How to Use Video Intercom Easy UI 2.0 on Hikvision Indoor Monitor
How to setup Hikvision Modular Intercom with single Indoor Monitor
How to add additional Indoor extensions to Hikvision Modular Intercom
How to add additional Sub Door Station to Hikvision Modular Intercom
How to configure calling schedules on Hikvision Intercoms
How to set passwords on Hikvision's Modular intercoms