HES K100 Wireless Cabinet Lock

The flexible integrated solution for extending access control to secure locker drawers and doors.

The HES K100 cabinet lock comes standard with locked state & tamper monitoring, optional mechanical key override and over 150 lbs of holding force.

The HES K100 supports HID multiCLASS SE^® contactless credentials. It uses local wireless communication between the lock and an Aperio hub to bring access control to cabinet doors and drawers where audit trail and real-time monitoring are required.

Specifications

Certifications:

• FCC Part 15 & Industry Canada Compliant
• CE RED – Radio Equipment Directive – 2014/53/EU
• RoHS Compliant

Electrical:

• Estimated Battery Life: 50,000 Cycles
• (2) “AA” lithium batteries (included)
  • AA Lithium Batteries required. Use of other types of batteries, such as alkaline, will significantly decrease battery life.
  • Battery voltage monitoring
  • microUSB port for emergency power

Holding Force:

• Static strength 150 lbs

Environmental:

• Operating Temperature: 32 to 122 F (0 to 50 C)
• Tested to meet IP65

Card Technology: HID^® multiCLASS SE^®

High Frequency (13.56 MHz)

–   HID iCLASS^®

–   HID iCLASS SE (SIO-enabled)

–   HID iCLASS^® Seos™

–   HID MIFARE^® SE

–   HID DESFire^® EV1 SE

–   MIFARE CLASSIC

–   DESFire^® EV1

Low Frequency (125 kHz)

–   HID Prox^®

–   AWID

–   EM4102

–   ioProx

NFC/BLE-enabled credentials (supported on BLE-enabled mobile phones)

Standard Features 

• For use with swinging and sliding cabinet doors and drawers with a door thickness of up to 2-1/4”
• 2.4 GHz Aperio wireless technology
• Supports HID multiCLASS SE^® card technologies
• Supports NFC & BLE mobile credentials
• Integrates with existing access control systems and ID badges
• Audit trail limited by EAC system
• LEDs indicate valid/invalid entries; Red/Amber or Green/Amber
• Integrated locked state and tamper monitoring
• Automatic relock when door is closed and secure
• Non-handed
• Black finish
• (3) optional shaft lengths to accommodate up to 2-1/4” door thickness
• SecuriCare three-year, no-fault, no questions asked warrant

Optional Features

• Mechanical key override (sold separately)
• Pinch (P) or Lever (L) Knobs
• Knob shaft lengths: 
  • (_)1/16” to 1/2” (standard) 
  • (2) ≥ 1/2” to 1-1/2”
  • (3) ≥ 1-1/2” to 2-1/4”

Accessories

• OBS-622 Open back strike plate for drawers
• EXT-10-ANT Aperio Hub External Antenna (Omni-directional)

Note: The HES K100 cabinet lock is available as either a pre-paired lock and hub kit (no certification required) or as a field configurable component (requires Aperio^® Certified Integrator certification). Pre-paired kits support limited features, field configured devices are required in order to support all options.