GSH HD157 Full Surface Alum Geared Hinge


• Aluminum alloy with self-lubricating bearings
• Continuous Geared Full Surface Hinge with 1/16” (1.6mm) inset is Ideal for retrofit applications were original hinges have failed
• Can be used with any Standard Frame Without hinge preps.
• The Frame face must have a Flat surface at least 7/8” (22mm) wide.
• 83” length available in clear and dark bronze anodized
• Hinges are shorter than the Door height to avoid threshold or carpet Clearance problems
• Clearance required between the hinge edge of the Door and the Frame must be 1/32” (0.8mm)
• For 1-3/4” Doors. 48” maximum Door width. Up to 200 pounds high frequency and 400 pounds for medium frequency Doors.
• UL tested and approved for 90 minutes

GSH HD157 Full Surface Alum Geared Hinge

Scroll to Top

Submit a Ticket


Until Then

Please Contact Us Here

We are your one stop solution for all your security needs.

Submit a ticket