GEZE Slimdrive EMD-F/R-IS

Electromechanical swing door drive system for double leaf fire and smoke protection doors with closing sequence control and integrated smoke switch

Closing force with variable adjustment from EN3-6
Integrated smoke switch control unit, whose signal closes the door automatically in the event of a fire
Opening and closing speed can be individually adjusted
Mechanical latching action when operated without current, and electrical latching action in regular operation, which accelerates the door shortly before the closed position
Mechanical and electrical closing sequence control holds the active leaf in the waiting position until the passive leaf is closed
Low-energy function opens and closes the door with reduced speed, fulfilling the highest safety requirements

Vestibule function controls the opening and closing of two consecutive doors (interlocking door system)
Obstacle detection detects obstacles through contact and stops the opening or closing process
Automatic reversing detects an obstacle and returns to the opening position
Push & Go function triggers the automatic drive components following light manual pressure on the door leaf
Drive can be used with roller guide rail or link arm
Servo function for motorized support when manually opening the door

Electromechanical swing door drive system for double leaf fire and smoke protection doors with closing sequence control and integrated smoke switch

Application Areas

Fire and smoke protection doors
Double leaf right and left single-action doors
Single-action doors up to 2800 mm hinge clearance, 1400 mm leaf width and 230 kg weight
Interior and exterior doors with high access frequency
Transom installation hinge and opposite hinge side

Product specifications

	Slimdrive EMD-F/R-IS
Leaf weight (max.)	230 kg
Hinge size (min.-max.) 2-leaf, link arm	1500 mm – 2800 mm
Hinge size (min.-max.) 2-leaf, roller guide rail	1700 mm – 2800 mm
Leaf width (min.-max.)	850 mm – 1400 mm
Reveal depth (max.)*	300 mm
Door overlap (max.)*	50 mm
Drive type	Electromechanical
Opening angle (max.)	135 °
DIN left	Yes
DIN right	Yes
Installation in the door leaf	No
Installation in the door frame	No
Transom installation opposite hinge side with link arm	Yes
Transom installation opposite hinge side with roller guide rail	No
Transom installation hinge side with roller guide rail	Yes
Door leaf installation opposite hinge side with roller guide rail	No
Door leaf installation hinge side with roller guide rail	No
Door leaf installation hinge side with link arm	No
Mechanical latching action	Yes
Electrical latching action	Yes
Electrical closing sequence control	Yes
Mechanical closing sequence control	Yes
Disconnection from mains	Cable plug connection
Activation delay (max.)	20 s
Operating voltage	230 V
Frequency of supply voltage	50 Hz
Power rating	230 W
Power supply for external consumers (24 V DC)	1200 mA
Operating temperature	-15 °C – 50 °C
Air humidity non-condensing (max.)	95 %
IP rating	IP20
Modes of operation	Automatic, Permanently open, Night, Off, Shop closing
Automatic function	Yes
Low-energy function	Yes
Smart swing	No
Servo function	No
Inverse function (opening by spring force)	No
Obstacle detection	Yes
Automatic reversing	Yes
Push & Go	adjustable
Operation	Programme switch integrated in the drive, Programme switch DPS, Programme switch MPS
Parameter setting	ST 220 service terminal, Programme switch DPS, GEZEconnects (PC + Bluetooth)
Approvals	EN 16005, DIN 18650, DIN 18263-4, General building approval from DIBt as a hold-open system, Door closing sequence selector tested in accordance with EN 1158
Suitability for fire protection doors	Yes
Integrated smoke switch	Yes