F101-A XF P1367 Explosion-Protected Network Camera

In hazardous areas, the color red is usually associated with devices used for alarms and security such as fire extinguishers, fire alarms, sirens, and the like. So when we paint network devices like cameras, we create an important association with safety. In addition, red safety devices stand out in their surroundings, so they:

• Make personnel feel safer
• Are more valuable as deterrents
• Increase awareness of the device and where it’s placed

In particular, it’s important that personnel know where network cameras are located in order to be able to use them to signal to operators in emergency situations. So, while our network devices are used both for safety purposes and for monitoring operations, we chose to offer a camera – made in red – that prioritizes deterrence on your premises and safety of your personnel. Moreover, the aluminum enclosure guarantees low weight and cost, without compromising on durability and resistance against corrosion.

F101-A XF P1367 Explosion-Protected Network
Camera

Superb light sensitivity in hazardous areas

F101-A XF P1367 Explosion-Protected Network Camera is an easy-to-install and easy-to-integrate fixed box camera.
Thanks to i-CS lens, the zoom can be set remotely, and the camera automatically sets the focus. Images are optimized
for forensic purposes regardless of lighting conditions, thanks to Lightfinder and WDR–Forensic Capture. The camera
is adapted for explosion-prone applications with Class I/II/III, Division 1 and Zone 1 certifications. With low weight,
PoE support for plug-and-play installation, F101-A XF P1367 offers significant savings. The camera helps detecting
unauthorized individuals and monitor employee safety in hazardous areas. Suitable for onshore, offshore, marine, and
heavy industrial environments.

> Class I/II/III, Division 1 and Zone 1 certified
> Cost-efficient installation with PoE
> Low weight for simple installation
> Support for i-CS lens for remote zoom and focus
> 5 MP resolution at 25/30 fps

F101-A XF P1367 Explosion-Protected Network Camera

Camera

Image sensor 1/2.9” progressive scan RGB CMOS
Lens IR corrected i-CS lens
Varifocal 2.8–8.5 mm, F1.2
Horizontal field of view: 104°–36°
Vertical field of view: 55°–20°
Day and night Automatically removable infrared-cut filter
Minimum
illumination
Color: 0.15 lux
B/W: 0.03 lux, at 50 IRE F1.2
Shutter time 1/55500 s to 2 s

Video

Video
compression
H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles
Motion JPEG
Resolution 3072×1728 (5 MP) to 160×90
Frame rate 25/30 fps (50/60 Hz) in all resolutions
Video streaming Multiple, individually configurable streams in H.264 and Motion
JPEG
Zipstream technology in H.264
Controllable frame rate and bandwidth
VBR/MBR H.264
Multi-view
streaming
Up to 8 individually cropped out view areas
Image settings Saturation, contrast, brightness, sharpness, local contrast, white
balance, exposure control, exposure zones, WDR – forensic
capture: Up to 120 dB depending on scene, fine tuning of
behavior at low light, rotation: 0°, 90°, 180°, 270° including
Corridor Format, text and image overlay, privacy mask, mirroring
of images

Network

Security Password protection, IP address filtering, HTTPSa
encryption,
IEEE 802.1Xa
network access control, Digest authentication, User
access log, brute force delay protection
Supported
protocols
IPv4/v6, HTTP, HTTPSa
, SSL/TLSa
, QoS Layer 3 DiffServ, FTP,
CIFS/SMB, SMTP, Bonjour, UPnP™, SNMP v1/v2c/v3 (MIB-II),
DNS, DynDNS, NTP, RTSP, RTP, SRTP, SFTP, TCP, UDP, IGMP, RTCP,
ICMP, DHCP, ARP, SOCKS, SSH, LLDP, MQTT

System Integration

Application
Programming
Interface
Open API for software integration, including VAPIX® and
AXIS Camera Application Platform; specifications at axis.com
AXIS Video Hosting System (AVHS) with One-Click Connection
ONVIF® Profile G, ONVIF® Profile S, and ONVIF® Profile T,
specification at onvif.org
Analytics Included
AXIS Video Motion Detection, active tampering alarm
Supported
AXIS Digital Autotracking, AXIS Perimeter Defender,
AXIS Cross Line Detection, AXIS Guard Suite including
AXIS Motion Guard, AXIS Fence Guard, and AXIS Loitering Guard
Support for AXIS Camera Application Platform enabling
installation of third-party applications, see axis.com/acap
Event triggers Analytics, edge storage events
Detectors: live stream accessed, video motion detection, shock
detection
Hardware: network, temperature
Storage: disruption, recording
System: system ready
Time: recurrence, use schedule
Event actions Record video: SD card and network share
Upload of images or video clips: FTP, SFTP, HTTP, HTTPS, network
share and email
Pre- and post-alarm video or image buffering for recording or
upload
Notification: email, HTTP, HTTPS, TCP and SNMP trap
Overlay text, day/night mode
Data streaming Event data
Built-in
installation aids
Pixel counter
Remote focus and zoom with supplied i-CS lens

General

Casing IP66-rated, powdercoated aluminum chassis
Casing manufactured and certified by Spectrum Camera
Solutions, LLC
Sustainability PVC free
Memory 1 GB RAM, 512 MB Flash
Power Camera: Power over Ethernet (PoE)
IEEE 802.3af/802.3at Type 1 Class 3, typical 5.0 W, max 9.1 W
Heater: 12–30 V AC/DC, 26 W
Connectors 2 x ¾” NPT cable entries
RJ45 10BASE-T/100BASE-TX PoE
2-pin terminal block connector for heater
I/O: 4-pin 2.5 mm terminal block for two configurable
inputs/outputs (12 V DC output, max. load 50 mA)
3.5 mm mic/line in, 3.5 mm line out
Storage Pre-installed AXIS Surveillance microSDXC Card 128 GB
Support for SD card encryption
Support for recording to network-attached storage (NAS)
For SD card and NAS recommendations see axis.com
Operating
conditions
Hazardous location operating temperature:
Zone system: -50 °C to 60 °C (-58 °F to 140 °F)
Class/Division system: -40 °C to 60 °C (-40 °F to 140 °F)
Humidity 10-100% RH (condensing)
Storage
conditions
-40 °C to 65 °C (-40 °F to 149 °F)
Approvals EMC
EN 55032 Class A, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3
Environment
ANSI/NEMA 250 4X, ANSI/IEC/EN 60529 IP66
Explosion
FM Class 3600:2018, FM Class 3615:2018,
FM Class 3616:2011, ANSI/ISA/EN/IEC/CAN-CSAC22.2 60079-0,
ANSI/ISA/EN/IEC/CAN-CSAC22.2 60079-1,
ANSI/ISA/EN/IEC/CAN-CSAC22.2 60079-31
Certifications USA:
Class I Division 1 Groups BCD T6 Ta= -40°C to 60°C, Type 4X, IP66
Class II/III Division 1 Groups EFG Ta= -40°C to 60°C, Type 4X, IP66
Certificate: FM18US0262X
Canada: Class I Division 1 Groups BCD T6 Ta= -50°C to 60°C,
Type 4X, IP66
Class II/III Division 1 Groups EFG Ta= -50°C to 60°C, Type 4X, IP66
Class I, Zone 1, AEx/Ex db IIB+H2 T5 Gb Ta = -50°C to 60°C,
Type 4X, IP66
Zone 21, AEx/Ex tb IIIC T85°C Db Ta = -50°C to 60°C, Type 4X,
IP66
Certificate: FM18CA0126X
ATEX:
II 2 G Ex db IIB+H2 T5 Gb Ta = -50°C to 60°C, IP66
II 2 D Ex tb IIIC T85°C Db Ta = -50°C to 60°C, IP66
Certificate: FM18ATEX0073X
IECEx:
Ex db IIB+H2 T5 Gb Ta = -50°C to 60°C, IP66
Ex tb IIIC T85°C Db Ta = -50°C to 60°C, IP66
Certificate: IECEx FMG 18.0029X
Dimensions 13.85 x 7.20 x 6.01 in (352 x 183 x 153 mm)
Weight 6.4 kg (14 lb)
Included
accessories
Installation Guide, Windows®
decoder 1-user license,
weathershield, 3/4″ NPT to M20x1.5 thread adapter, AXIS
Surveillance microSDXC Card 128 GB
Optional
accessories
Wall Mount, Pole Mount, Corner Mount,
AXIS Surveillance Card 64 GB
For more accessories, see axis.com
Video
management
software
AXIS Companion, AXIS Camera Station, video management
software from Axis Application Development Partners available
at axis.com/vms
Languages English, German, French, Spanish, Italian, Russian, Simplified
Chinese, Japanese, Korean, Portuguese, Traditional Chinese
Warranty Axis 3-year warranty and AXIS Extended Warranty option, see
axis.com/warranty
a. This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/), and cryptographic software written by
Eric Young (eay@cryptsoft.com).
Environmental responsibility