Dormakaba 0563 1/2″ Rim

The 0563 ½” rim strike is designed slim for tight-fitting installations with Pullman latch rim exit devices. The RCI 0563 has an optional adjustment to expand the strike to ¾” with a spacer. This modern strike utilizes micro-motor technology instead of traditional solenoid to reduce the power needed and draws less than 10 milliamps during operation. The RCI 0563 is field selectable for fail-safe or fail-secure, making it a flexible solution to fit multiple access control situations.

  • Energy: 19mA Auto-Sensing 12-24VDC (Steady state current at 12VDC, 153mA peak)
  • Strength: 1,500lbf Static 70ft-lb Dynamic
  • Endurance: 100,000 Cycles
  • Mode: Field-Selectable Fail-Safe & Fail-Secure
  • Monitoring: Optional Latch Monitor Model Available
  • Warranty: 5 Year Limited Warranty
Product Details
  • Surface-mounted – no frame cutting required
  • Accommodates 1/2″ to 3/4″ (13mm–19mm) latch projection
  • Includes two 1/8″ (3.2mm) spacers to create two additional sizes, 5/8″ (16mm) & 3/4″ (19mm)
  • Horizontal adjustment ensures proper latch positioning to compensate for door misalignment – up to 1/4″ (6.4mm)
  • Conventional keeper design (one moving part) – promotes even load distribution
  • Lockdown holes for secure mount
  • Low energy: draws less energy than traditional solenoid strikes
  • Cost savings: operate 3X more strikes per power supply
  • Cooler operation – runs cool to the touch; no suppressor kit needed
  • High-grade stainless steel ensures superior strength and creates a sleek aesthetic
  • Non-handed
  • Plug-in wire connectors
  • 19mA Auto-Sensing 12-24VDC (Steady state current at 12VDC, 153mA peak)
  • 1,500lbf Static 70ft-lb Dynamic
  • 100,000 Cycles
  • Field-Selectable Fail-Safe & Fail-Secure
  • Optional Latch Monitor Model Available
  • 5 Year Limited Warranty

Dimensions: 1-3/4″W x 9″H x 1/2″D (45mm x 229mm x 13mm)

  • Brushed Stainless Steel (32D) finish
  • UL 1034 burglary-resistant Listed
  • Patent pending
  • 0162DDH – Double door housing, SPC finish (SPC=Silver Powder Coat)
  • 0162MSK – 1/16″ (1.5mm) mounting spacer

Note: Maximum voltage must not exceed 28V. Overheated or burnt PCBs caused by incorrect input voltage will not be covered under warranty. UL 1034 Burglary-resistant listing does not apply with use of 0563DDH.

  • Commercial Centers
  • Industrial Buildings
  • Educational Facilities
  • Retail Outlets
  • Health Care Facilities
  • Office Complexes
Scroll to Top

Submit a Ticket


Until Then

Please Contact Us Here

We are your one stop solution for all your security needs.

Submit a ticket