Contact Our Team
  • Sensors
  • BEA IXIO-DT1 Motion And Presence Sensor For Automatic Sliding Doors
BEA IXIO-DT1 Motion And Presence Sensor For Automatic Sliding Doors
BEA IXIO-DT1 Motion And Presence Sensor For Automatic Sliding Doors
BEA IXIO-DT1 Motion And Presence Sensor For Automatic Sliding Doors
BEA IXIO-DT1 Motion And Presence Sensor For Automatic Sliding Doors
Category: .
  • Sensors
  • BEA IXIO-DT1 Motion And Presence Sensor For Automatic Sliding Doors

BEA IXIO-DT1 Motion And Presence Sensor For Automatic Sliding Doors

Description

BEA’s IXIO-DT1 is a dual technology motion and presence sensor, combining microwave activation and infrared presence detection for the automatic sliding door industry.

This solution is highly flexible and user-friendly for sliding doors, industrial doors, vehicle gate detection and off-door automation.

The IXIO-DT1 can be adjusted into ANSI compliance and has earned a comprehensive list of credentials and certifications, including FCC and IP54.

The IXIO-DT1 ensures convenience, safety and energy efficiency for BEA customers and end users.

Features
Energy efficient

Ten microwave activation sensitivity settings and three infrared safety immunity settings

Precise presence detection

Two 24-spot, high-density, infrared safety curtains providing precise presence detection

Standards compliant

Fully monitored internally, capable of external monitoring

Easily adjustable

Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment

TABLE OF SPECIFICATIONS

Technology Microwave Doppler Radar Active Infrared
Detection Mode Motion Presence
Transmitter Frequency 24.150 GHz N/A
Transmitter Radiated Power < 20 dBm EIRP N/A
Transmitter Power Density < 5 mW / cm2 N/A
Spot Size N/A 2” × 2”
Max. Number of Spots N/A 24 per curtain
Max. Number of Curtains N/A 2
Output 

Max. Contact Voltage
Max. Contact Current
Hold Time

 Electro-mechanical-relay
(potential and polarity free) 

30 VDC
1 A
0.5 – 9 s
(user adjustable)

 Solid-state-relay
(potential and polarity free) 

42 VAC / VDC
400 mA
0.3 – 1 s
Test Input
Sensitivity		 Low: < 1 V;
High: > 10 V (max. 30 V)
Response time on test
request:
typical: < 5 ms		 Sensitivity:
Low: < 1 V;
High: > 10 V (max. 30 V)
Response time on test
request:
typical: < 5 ms
Supply Voltage 12 – 24 VAC ±10%; 12 – 30 VDC ±10%
(to be operated from SELV compatible power supplies only)
Power Consumption < 2.5 W
Mounting Height 6 ½ – 11 ½’
Temperature Range* -13 – 131 °F
0 – 95% relative humidity, non-condensing
Degree of Protection IP54
Applicable Directives R&TTE 1999 / 5 / EC; LVD 2006 / 95 / EC;
MD 2006 / 42 / EC; ROHS 2 2011 / 65 / EU
Dimensions 10 3⁄5“ (W) × 2 ¼” (H) × 2 ¼” (D)
Cable Length 10’
Norm Conformity ISO 13849-1:2008 PL «c» CAT. 2
(under the condition that the door control system monitors the sensor at least once per door cycle)
IEC 61496-1:2012 ESPE Type 2

*LCD screen is operational from 14 – 131 °F. The sensor may still be programmed in colder temperatures, but with the remote control.

 

Category: Tags: , , , , , , ,
Get Pricing
PDF

Videos

Portfolio