Related products
BEA BODYGUARD-T Overhead Presence Sensor For Automatic Doors
Description
BEA’s BODYGUARD-T is an overhead presence sensor designed for pedestrian automatic doors.
The BODYGUARD-T provides threshold protection during the door open state. It is designed to prevent a closed door from opening and an open door from closing when a person is in the detection zone.
The sensor is easy to install and adjustments can be made by using the BEA remote control
Features
Overhead presence sensor
Versatile sensor can be used on single swing, simultaneous pair, dual egress and folding doors when coupled with an interface / lockout device
Customized detection
Separate pattern width, depth and sensitivity for open and closed door states for maximum flexibility
Standards compliant
Fully monitored internally, capable of external monitoring
Visible Indication
Visible LED indicates connection between sensor and door control
TABLE OF SPECIFICATIONS
| Technology | Active Infrared | |
|---|---|---|
| Detection Mode | Presence | |
| Installation Height (variable) | 9’ 0” maximum (recommended: 6’ 6” – 8’ 0”) | |
| Mounting Angles Bodyguard Only With Bodymount |
5°, 10° ( factory default setting: 5° ) 0°, 5°, 10° |
|
| Power Supply | 12 – 24 VAC / VDC ±10% | |
| Frequency | 50 – 60 Hz | |
| Output Maximum Contact Voltage Maximum Contact Current Maximum Power Supply |
60 VDC / 125 VAC 1 A 30 W (DC), 60 VA (AC) |
|
| Relay Hold Time | 0.5 – 9 s | |
| Operating Temperature | −22 °F – 140 °F | |
| Immunity | Immune to electrical and radio frequency interference | |
| Cable | 4’ | |
| Weight | 1 lb 11 oz | |
| Dimensions | 12” (W) × 2” (H) × 2” (D) | |
| Material | Aluminum & ABS plastic | |
| Housing | Black anodized aluminum |
* To use the Bodyguard-T sensor with unmonitored door controls that supply AC voltage or unfiltered DC voltage, the Rectifier Module (Part # 20.5411) must be used with the sensor to disable the monitoring function.
BEA BODYGUARD-T Overhead Presence Sensor For Automatic Doors
