Related products
-
Access Control
Seco-Larm 1-Channel, 315MHz, Miniature RF Receiver with Transistor Ground Output
Rated 0 out of 5Read more -
Door Buttons
Seco-Larm Vandal-Resistant Metal Pushbutton Switch – Flush-Mount with Backbox
Rated 0 out of 5Read more -
Access Control
Seco-Larm 2-Channel RF Receiver, 11~24 VAC/DC, 315MHz, two relays
Rated 0 out of 5Read more
BEA IXIO-ST Industrial Presence Sensor For Small Interior Industrial Doors
Description
BEA’s IXIO-ST INDUSTRIAL is an effective, versatile and easy-to-use presence sensor for interior industrial doors, automatic sliding doors and off-door industrial automation. It can be used for both clear door openings and side-lite protection.
Precise infrared curtains coupled with visible alignment beams make the IXIO-ST INDUSTRIAL extremely safe and easy to adjust. This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
The IXIO-ST INDUSTRIAL has earned a comprehensive list of credentials and certifications, including FCC and IP54.
Features
Precise presence detection
Two 24-spot, high-density, infrared safety curtains providing precise presence detection
Easily adjustable
Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment
Ease of setup
Intelligent programming and troubleshooting via a menu-driven LCD
Intelligent solution
On board microprocessor optimizes data analysis, monitors sensor performance and enables system integration
TABLE OF SPECIFICATIONS
Technology | Active Infrared | |
---|---|---|
Detection Mode | Presence | |
Spot Size | 2” × 2” | |
Max. Number of Spots | 24 per curtain | |
Max. Number of Curtains | 2 | |
Output
Max. Contact Voltage |
Solid-state-relay (potential and polarity free)42 VAC / VDC 400 mA Infrared: 0.3 – 1 s |
Solid-state-relay (potential and polarity free)42 VAC / VDC 400 mA Infrared: 0.3 – 1 s |
Test Input | Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms |
Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms |
Supply Voltage | 12 – 24 VAC ±10%; 12 – 30 VDC ±10% (to be operated from SELV compatible power supplies only) |
|
Power Consumption | < 2.5 W | |
Mounting Height | 6 ½ – 11 ½’ | |
Temperature Range* | -13 – 131 °F 0 – 95% relative humidity, non condensing |
|
Degree of Protection | IP54 | |
Applicable Directives | R&TTE 1999 / 5 / EC; LVD 2006 / 95 / EC; MD 2006 / 42 / EC; ROHS 2 2011 / 65 / EU |
|
Dimensions | 10 3⁄5“ (W) × 2 ¼” (H) × 2 ¼” (D) | |
Cable Length | 30’ | |
Norm Conformity | ISO 13849-1:2008 PL «c» CAT. 2 (under the condition that the door control system monitors the sensor at least once per door cycle) IEC 61496-1:2012 ESPE Type 2 |
*LCD screen is operational from 14 – 131 °F. The sensor may still be programmed in colder
temperatures, but with the remote control.
BEA IXIO-ST Industrial Presence Sensor For Small Interior Industrial Doors