Related products
-
Door Wave Touchless Switch
Seco-Larm “No Touch” RTE IR Sensor, Single-gang Plate – English
Rated 0 out of 5Read more
ICT Inovonics Wireless Receiver Module
PRT-IVO-IF
The Inovonics Wireless Receiver Module is designed to facilitate integration between ICT’s Protege systems and wireless Inovonics devices. It contains the Inovonics EN4200 Echostream receiver which translates incoming Inovonics signals so that they are understood by Protege Controllers.
Key Features:
- Connect to a ProtegeWX or ProtegeGX controller via RS-485 or Ethernet
- Onboard web interface for easy network setup
- Firmware upgrade via TFTP (Trivial File Transfer Protocol)
- Link up to 255 Inovonics devices
- Links Inovonics remotes to Protege users
- One FORM C relay output
- Available in two wireless frequency versions
Web Interface
The web interface enables you to configure and manage the settings. You can also monitor the status of the interface board and view the version information.
Linking Inovonics Devices
Each module links up to 255 Inovonics devices such as wireless PIRs and remotes to the Protege system. The module also links Inovonics remotes to users so they can gain access to a door controlled by an Inovonics device.
Secure Connection
The module has the ability to connect to a ProtegeWX or ProtegeGX controller via RS-485 or Ethernet.
Wireless Frequencies
Two variants of the module are available:
- PRT-IVO-IF: for use in the US (902-928MHz), Australia (915-928 MHz), and New Zealand (922-928 MHz)
- PRT-IVO-IF-EU: for use in the EU region (868-870 MHz)
FORM C Relay Output
The wireless receiver module has one onboard FORM C relay output capable of switching resistive loads up to 7 Amps.
Specifications
Ordering Code | PRT-IVO-IF PRT-IVO-IF-EU |
Power Supply | |
Operating Voltage | 11-14VDC |
Operating Current | 160mA @ 13.0VDC (typical) |
Communication | |
RS-485 | Module network |
Ethernet | 10/100Mbps Ethernet communication link |
Operating Frequencies | 902-928 MHz 915-928 MHz (AUS) 922-928 MHz (NZ) 868-870 MHz (EU) |
Outputs | |
Relay Output | 1 FORM C Relay – 7A 250V Max Resistive |
Dimensions | |
Dimensions (L x W x H) | 162.0mm x 91.4mm x 27.9mm (6.38” x 3.60” x 1.10″) |
Weight | 180.2g (6.4oz) |
Temperature | |
Operating | 0˚-50˚C (32˚ – 122˚F) |
Storage | -10˚- 85˚C (14˚ – 185˚F) |
Humidity | 0%-93% non-condensing, indoor use only (relative humidity) |
ICT Inovonics Wireless Receiver Module