Related products
-
Access Control
Seco-Larm – 2-Button, 3-Channel, Slimline Handheld RF Transmitter
Rated 0 out of 5Read more
Dormakaba WSSKP-1
The WSSKP-1 keypad provides an alternative to card readers and may be connected to any Keyscan control unit or other manufacturer’s control unit that supports a Wiegand standard 26-bit format as an input signal. The WSSKP-1 can also be used conjointly with a proximity reader. Generally, this applies to a retro-fit where a keypad or reader already exists. The WSSKP-1 has standalone capabilities storing up to 28 PIN codes. The stored PIN codes can be used to activate an alarm panel for arming and disarming, locking and unlocking a door, or triggering a video surveillance system. The WSSKP-1 keypad can be used for both Wiegand signal and digital output. The WSSKP-1 is a rugged, water-resistant, stainless steel unit and may be installed indoors or outdoors.
- Stand alone access control or part of a complete access control system
- Suitable as replacement “reader” for any Keyscan 36 bit (or standard 26 bit) Wiegand reader
- Brushed stainless steel keypad for durability that matches almost any décor
- Braille keys for visually impaired requirements
- Suitable for most exterior or interior applications
- Simple to use commands allow maximum flexibility
- Fast, easy, trouble-free installation
Product Details
Features
- WSSKP-1 supports industry standard 26 bit Wiegand data or proprietary Keyscan 36 bit format, it can be used with either a Keyscan ACU or with alternate control units supporting standard 26 bit data
- Three digit facility codes can easily be activated for installations using site or facility codes from 001 to 255
- Braille keypad permits use in premises that are accessible to visually impaired
- In stand alone applications, PIN’s can be set up to be either 3, 4 or 5 digits to suit the customer’s security requirements
- Any single PIN can be changed OR all PIN’s can be deleted with simple keypad command sequences for stand alone applications
- As many as 28 distinct PIN codes can be programmed into the WSSKP-1 for stand alone operation
Technical Data
Dimensions: 3″ x 4.5″ x 0.5″ (76mm x 114mm x 13mm)
- Power supply: External
- Input power (min): 12VDC ± 5% (30 mA)
- Output (max): 12VDC@500mA into non- inductive or diode suppressed inductive load
- Maximum power: 530 mA
- Mechanical tolerances: Key travel 0.050” (1.27mm)
- Key pressure: light touch, audio feed back, positive action keypad requiring only 4lbs (1.81kg) pressure
- Certifications: FCC Pt 15, sub J for a class B device, UL, CSA, CE
- Environmental tolerances: Suitable for light to moderate residential, commercial and industrial applications
- Relative humidity: 5% to 95% Non-Condensing
- Operating temperature: -35° to 65° C
- Button life expectancy: greater than 1,000,000 activations
Dormakaba WSSKP-1